10 Tools Every Homeowner Should Have In A Toolbox

11 Tools Every Homeowner Should Have In A Toolbox

That times and you’ll need to decide whether to hire a contractor or do home repairs itself.

One advantage of doing it yourself is that you can save tons of money. The DIY to use painting, cutting his, landscaping and more.

One of the keys to saving money your own repairs is having a fully stocked toolbox on hand.

You don’t want to go out and buy every single tool in the face of the, you should spend money on the essentials that you will be using on a daily basis.

The good news is that you don’t need many tools in order to be prepared for home emergency is. There’s literally about a dozen tools that are essential and will be new using most basically Pierce.

In the following article, we’ll take a closer look at toolbox essentials and how they can help with home repairs and maintenance.


Safety gear

welding gear

Certain DIY jobs can tend to be risky. Things such as wood splinters, dust, and fumes can cause injury, especially to eyes. In order to protect yourself, you need a few essential pieces of safety wear.

Gloves: Well-made gloves keep splinters out and also keeps rough bricks from scraping against your skin. Aside from that, it will also keep heat and cold away from your skin.

They won’t prevent you from hitting your thumb with a hammer; however, at least it will soften the blow.

A good pair of gloves also provide protection by allowing you to have a firm grip on the tools that you are using. When working with chemicals such as paint stripper, keep a second pair of cheap disposable gloves on hand.

Goggles: safety goggles will change eyes trying to please and sawdust. They also keep from splashing chemicals in your eyes.

Aside from Additionally, if a wire ever pops lose and hits you in the face, the goggles will prevent it from taking out your eye.

Goggles should be strong, secure and lightweight. Even if you wear glasses, goggles should fit right over them.

They should also have enough padding for comfort and enough ventilation to keep the goggles from fogging up.

Mask: A mask will protect you from inhaling debris, particles, and dust while you work. 

This is a crucial piece of equipment when you are sending, sawing, or putting up fiberglass insulation. Disposable masks can be bought in multipacks at one dollar each.

In order to keep out harmful vapors, you’ll need a mask with more functionality. They seal tightly around the edges to chemicals and fumes out of your lungs.

They also have a built-in filter cartridge that absorbs dangerous gases before that cause harm to you. Different types of masks work against different acids, ammonia, and chemicals.

Circular saw

Cutting With Hitachi Circular Saw

When it comes to small cutting jobs, a hand works fine. However, when you need to cut large amounts of wood, a circular saw is going to be much faster.

Professionals say that this tool is essential for big do-it-yourself jobs such as windows, putting up shelves, or adding a deck.

A circular saw is basically an all-purpose saw. It has a blade that spins and cuts fast through the wood. The fast-spinning blade, of course, is risky, and you will need to take extra care when using it.

However, when it comes to speed and flexibility, it’s the best tool that you can buy. Two types are available. The first is Sidewinder, which has a motor mounted on the side, and it’s also lighter and cheaper.

It’s also easy to maneuver. The second type is called Worm-drive saw, which has a motor behind the plate and is much heavier and also more expensive.

They pack more of a punch and are made of heavier materials. It’s used by professionals, but may be a handful for the typical DIY enthusiast.

Cordless circular saws are convenient since they are cordless; however they are not very helpful. They can also only work for a limited amount of time before you need to charge the battery.

Adjustable Pliers

Adjustable pliers in use

Adjustable pliers have various uses. A 10-inch pair of pliers has the ability to open up to more than 2 inches.

Irrespective of how wide you set them, jaws always remain parallel, and this gives them a firm grip on bolts, pipes, and nuts. In fact, they can grasp nearly anything that can bend and turn in many different ways.

Pliers have many different uses. They are great for adjusting garage doors, tightening up plumbing or installing a new toilet.

They can also tighten or loosen nuts on shutoff valves in cases where a large pipe wrench might not fit.

The most convenient size to own is a10 inch pair of pliers, according to experts. This is because they offer good leverage, and are small enough to be portable.

The best ones have V-shaped jaws and a padded handle so that you can easily grip onto it. The V-shaped jaws are also great when it comes to gripping round, flat, and hex-shaped objects.

New models are also easy to adjust with the push of a button, and this makes them simpler to use than the older models.


metal level

If you are trying to build something like a bookcase, you need to make sure the shelves are level, so the books don’t go siding off. The easiest way to do this is to use a level.

A level is a flat, small tool that has a tiny and clear vial of liquid that’s built into the center. The vial is only partly full, leaving a bubble at the top.

When the level is placed upon a flat surface, the bubble rises to the top. If the bubble is centered between the two lines, it tells you that the surface is flat.

Most levels also contain a vertical vial. In this way, you can use them to see the lines are correct.

You can use it to make sure your carpentry project comes out straight and even and also use it for hanging pictures,  laying a patio, and installing cabinets.

A mini level will fit nicely into your toolbox; however, for bigger projects, you will require a foot level. Metal levels are also stronger than plastic ones and made with heavier materials; however, it does cost more.



One of the most powerful tools to own is an electric drill. It’s two tools in one. It’s basically two tools in one. When you use the drill function, you can drill holes of all sizes.

You can drill pilot holes for screws, or you can drill more massive holes for running wires through the back of the TV.

When you replace the drill bit with a screwdriver bit, you can use it as an electric screwdriver, which is much faster than using your hands or a hand screwdriver.

This is especially handy when you have a lot of screws to screw in a short amount of time. When you need to repair drywall, replace a light fixture, or build a dog house or bookcase, it will come in handy.

While most cordless drills are useful, they are not as powerful as corded ones. They are much easier to use and more suited to DIY projects where a long extension cord will hinder your progress.

One of the most versatile drills is a 12-volt cordless drill with lithium-ion batteries. Although it’s light and small, it handles most DIY tasks. Bigger jobs, such as building a deck, may require you to upgrade to an 18-volt drill.


variety of screws

Certain hardware is essential for DIY tasks. A nailed without a hammer is useless, and so is a hammer without a nail.

Another advantage of keeping a variety of screws and nails on hand is that you won’t have to rush out to the hardware store every time something needs fixing in your house.

Nails come in a wide range of sizes, starting from tiny finishing nails to spikes that are several inches in length. Screws vary in type and size as well. 

Some are meant for attaching items to drywall, while others are meant for fastening wood. They can also be made from different types of material.

If you are building a toolbox, you can buy a packaged assortment of screws and nails. They come with handy bits of hardware such as wall anchors and picture hooks.

However, if you want to build your collection here a few things to include:

  • Finishing nails
  • Vinyl sinkers
  • Galvanized nails
  • Drywall screws
  • Outdoor screws

Having a variety of screws and nails on hand allows you to take care of all kinds of tasks without having to call a technician. Ultimately, this saves you a lot of money as well.

Utility Knife

utility knives

Many cutting jobs such as trimming wallpaper or opening boxes, require you to cut with something more powerful than a pair of scissors.

The best tool for these tasks is a sharp knife. The safest kind is of course a utility knife. While the blade is stored inside the handle, it can also be extended when and as needed.

A utility knife comes in handy for marking notches, shaving wood, or sharpening pencils.

A good utility knife will have a comfortable and secure handle. It also should have built-in storage for extra blades on hand. 

With blades stored on hand, you’re more likely to change them instead of carrying on with a blunt blade, which can be dangerous.

A utility knife is essential for your toolbox since it allows you to carry out cutting that’s needed to install wallpaper, carpets, and vinyl flooring.

Ultimately it also allows you to do this job without having to call in the professionals.

Air Impact Wrench

When it comes to loosen or tighten large bolts, fasteners, or lug nuts, an air impact wrench is something that you need. Even they are able to manage rusted or frozen fasteners.

You won’t be able to get such high-rotational torque they provide from a typical power driver.

They make it happen by a technology called the internal hammering mechanism, which provides kinetic energy to the output shaft. You may also know them as an impact gun, air gun, torque gun, or impactor.

A man named Robert H. Pott from Indiana first introduced it. This machine uses compressed air, electric also hydraulic as a power source.


good hammer

A nail is useless with a hammer. Most hammers have a claw opposite the head that you can use to pry nails out.

Hammers can be used for any job that requires a good pounding, such as banging framing lumber into place or breaking up a plaster wall.

Perhaps one of the most versatile hammers to own is a 16-ounce hammer with a curved claw and smooth head.

The size is used for light tasks such as hanging pictures and can also be used for heavy-duty ones such as repairing a deck. Pulling nails is made easier thanks to the curved claw.

When you have a good hammer, you can save money by purchasing furniture that is ready to assemble, instead of buying expensive pieces that are already assembled.

You also save money on home improvement projects as you won’t need to call a contractor and can take care of most of the work on your own. 

Reciprocating saw

Milwaukee Sawzall

A reciprocating saw cuts through just about anything short of a rock. When it comes to remodeling or demolition, this is your go-to tool.

This saw is also referred to as a Sawzall and allows you to all cut through lumber even if it has nails embedded in it.

You can also cut through common forms of steel, metal, copper, and iron. However you need a few extras to get the most out of this tool.

Some of the essentials that are needed in conjunction with this tool are protection gear such as glasses with anti-fog coating.

In some cases, when you’re working in a confined area, you should opt for using a full face shield.

They are lots of cordless reciprocating saws on the market, and they usually draw 12 to 15 Amps.

Biscuit joiner

biscuit joiner

A biscuit joiner, also known as a plate joiner, works by cutting half oval slots.

These two boards are then aligned and glued using a football-shaped piece of wood called a biscuit. Biscuits help keep pieces of wood and boards in place when they glued and clamped.

It has the same functionality as dowels. A biscuit joiner is often used when working with plywood.

Although it can be difficult to join together, especially when you are searching for an invisible joint where no hardware is exposed, using a biscuit joiner can make unobtrusive and clean joints in the plywood and allow two pieces of wood to come together.

Leave a Comment

Your email address will not be published. Required fields are marked *